Livpure Glo Star 7L RO, UV, UF Purifier AI-evaluated for mineral purification

The water tastes clean rather than flat, thanks to the mineral cartridge. Copper adds a faint note without overpowering the flavour. It works well for regular drinking water at home.

Flow is one of the better parts here. A 1-litre bottle fills in a few seconds, and the 15-litre-per-hour rate handles regular kitchen use easily. The 7-litre tank also keeps water ready between purification cycles.

The in-tank UV runs every hour even when electricity is off. That helps keep stored water treated during a power cut. The purifier still needs electricity to filter fresh water.

Seven litres is enough for a small family’s drinking and cooking needs. Water gets stored, so you don't have to wait every time someone fills a glass. Larger families may empty the tank faster during busy mornings.

The ABS body feels solid and doesn't look cheap on the wall. Its 290×500×256 mm size keeps the design fairly contained. The food-grade plastic tank sits inside a simple wall-mounted body.

Glo Star Copper gives you RO, UV, UF, copper, and mineral filtration in one setup. It also has a 7-litre tank and hourly in-tank UV for stored water. Pick this one if those features matter more than choosing a Kent model.

This purifier covers eight stages and supports input water up to 2000 TDS. It adds minerals after RO instead of leaving the water tasting flat. Aquaguard models differ by series, so this is the clearer pick when copper and a 7-litre tank are important.

Glo Star Copper gives you copper ionisation, mineralisation, and in-tank UV together. Its 7-litre tank suits normal family use, while the 15-litre-per-hour flow keeps refilling quick. Blue Star models vary, but this one keeps the filtration setup straightforward.

The stated input TDS range goes up to 2000, which covers many borewell and tanker water sources. RO handles the main dissolved impurities, while UV and UF add further treatment stages. Use the included TDS meter to check the water before and after purification.

Yes, the mineral cartridge keeps the water from tasting too flat after RO treatment. It retains minerals such as magnesium, calcium, and potassium. The copper note stays mild instead of taking over the taste.

Installation is free, and the box includes the purifier, installation kit, TDS meter, and manual. It is designed for wall mounting, so the installer needs a suitable spot near the water and power connections. Setup is generally straightforward for a normal kitchen.

Auto-start begins purification when the system needs to run. Auto-shutoff stops it after the tank fills, so you don't have to monitor the purifier constantly. The LED indicators show power, purification, and tank-full status.

The SV valve can develop a fault within the first few months. Service covers the issue during the one-year warranty period, and the repair is done without a charge. The main irritation is waiting for the service visit.

Service can take around three to five days when a part needs attention. The issue is usually handled under warranty without an extra charge. That wait feels long when the purifier is the home's main drinking-water source.

The tank is covered, so there isn't a clear window showing the remaining water level. You can see when it is full through the LED indicator. To check the exact amount left, you have to open the tap and judge from the flow.